Thingiverse

Barrage Dial and Support Ring

von JuiceNeutron

40 Downloads

25 Likes

0 Makes

Replacement dial for the construction wheels in the board game Barrage matching the original design. Attaches using original wheel plastic rivets. Fit is tight and depending on your print settings may require lightly tapping in the rivet with a hammer or scraping away excess material from the dial's hole. Recommend mounting the dial bed-side-up for a smoother look. Also included is a support ring to be glued to the bottom of the cardboard wheel. This will allow the wheel to sit flat on the table and not wobble on the rivet. It will also reduce warping of the cardboard wheel.

barrage boardgame boardgames construction dial game replacement wheel barrage boardgame boardgames construction dial game replacement wheel

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker

FDM / FFF

Dateiformat

STL

Material

PLA

Mindest-Druckbett

50 mm (Klein)

Software

Cura, PrusaSlicer o. Ä.

Noch keine Bewertungen

Noch keine Kommentare – sei der Erste!

Barrage Dial and Support Ring

Ähnliche Modelle

Zur Sammlung hinzufügen