Barrel Calendar

This is my new Barrel Calendar, it is a calendar that you can spin, check the date, and even fidget with! It consists of 10 parts, the stand, three barrels, and six brackets. The average print time is >10 hours and the brackets click into place. No screws or glue needed, but I would advise gluing the brackets to the stand. This model fits on every Bambu printer with a build plate of over 220mm x 220mm so not for the A1 mini, but all other models can work with this. Use My Print Profile for optimal results, if not using profile then read instructions and warnings below↓↓ All supports must be normal (auto) with a Snug fit setting.Recommend printing sideways on the build plate so that the print doesn't weld to the extrusion line.Do not use any mode faster than standard for printing because of the text, details, and snug fit supports.Use Adaptive Cubic with 15% infill Use By Object print sequence when printing the brackets.Don't use less than 0.20mm extrusion when printing brackets