🌈〰️Barrel PenHolder〰️🌈

🌈〰️Barrel PenHolder〰️🌈 Description An elegant evolution of the multi-part desk organizer! This model features a distinct, bulbous barrel silhouette that adds beautiful volume and a modern architectural touch to your workspace. The modular, multi-strand design allows you to easily mix and match filaments for multi-color patterns, dual-tone contrasts, or a sleek monochrome look. Assembly Instructions Due to the outward curvature of the vertical strands, alignment might seem a bit tricky or under tension at first. However, by following this specific, maker-tested workflow, the assembly becomes incredibly straightforward: Top Ring Assembly: Apply a small amount of cyanoacrylate (CA/superglue) into the slots of the top ring and fully insert all the vertical strands. Let it Cure: Wait for the glue to fully cure so that the top assembly becomes completely rigid. Bottom Base (In Batches): Align the loose ends with the bottom base. Begin seating and gluing the strands a few at a time. Let the CA glue set for each batch before moving to the next ones to maintain structural alignment. The Tweezer Trick: As you reach the final few strands, the structural tension will increase. Use a pair of tweezers to gently flex and guide the remaining tips into their designated bottom slots, then lock them permanently in place with a few final drops of glue.