Thingiverse
Basalt Terrain Base 1
von SnekyPete
459
Downloads
189
Likes
0
Makes
Basalt Base 1
Part of a multi piece terrain set for Chaos Lava pattern game mats.
This file is intended to be used as a piece of cover terrain for 28mm wargaming placed in a players deployment zone.
This model is made for 28mm Heroic scale models.
Each Basalt column is wide enough to completely support a 32mm round base.
This model will need to be split into 4 pieces to print on an Ender 3.
The base measures 320 x 300mm and is 67mm high.
To shrink the columns to fit a 25mm base size scale to 75%.
Can print without supports with the following Ender 3 settings.
Recommended Ender 3 settings
.6mm Nozzle
Layer Height .16
Line Width.6
Wall Thickness 1.8mm
Top/Bottom Thickness .8mm
Ironing OFF
Generate Supports NO
Build Plate Adhesion: NONE
Part of a multi piece terrain set for Chaos Lava pattern game mats.
This file is intended to be used as a piece of cover terrain for 28mm wargaming placed in a players deployment zone.
This model is made for 28mm Heroic scale models.
Each Basalt column is wide enough to completely support a 32mm round base.
This model will need to be split into 4 pieces to print on an Ender 3.
The base measures 320 x 300mm and is 67mm high.
To shrink the columns to fit a 25mm base size scale to 75%.
Can print without supports with the following Ender 3 settings.
Recommended Ender 3 settings
.6mm Nozzle
Layer Height .16
Line Width.6
Wall Thickness 1.8mm
Top/Bottom Thickness .8mm
Ironing OFF
Generate Supports NO
Build Plate Adhesion: NONE
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
