MakerWorld
Other Tools
Voir le modèle
Base Bevel File Guide
67
Téléchargements
13
Likes
35
Makes
Fully printable base bevel guides provided by a snowboarder and experienced tuner. Printing settings:I'd recommend 4 walls with 100% infill an 0.12 layer lines. I got the best and very clean results printing the part standing but your support settings should be dialed in to print this way.Be sure to debur the rough edges of the printed model so you dont scratch your ski's or board by accident. Play with seam settings so the seam isn't on the plane that touches the board or the file.Printed with matte PETG.The bolt used was made by Cam Chaney, you can find the original here together with his awesome side bevel guides. https://www.printables.com/model/854102-ski-edge-sharpening-guide How to use:Check the angle of your base bevel by marking the base edge with a sharpie. Run a shallow guide with a coarse diamondstone or fine file (18 or 16 cut file) along the edge of the board with even pressure. The guide that takes the sharpie completely away is your factory base bevel. (Star
Matelier publie également sur
6 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !