Thingiverse
base Legs for the Atomstack P1
door MARCOS_BENJAMIN
3
Downloads
5
Likes
0
Makes
Elevation Support for Atomstack P1 with 2 Sizes and Threaded Fit First part: 60 mm
Second part: 44.85 mm
Printed on the K1C without supports, using a brim for better bed adhesion. I used a 5 mm screw (the original Atomstack P1 size), inserted into the hole of the part, then cut with a jeweler's saw to avoid damaging the threads, leaving a final length of 5 mm. Please double-check everything before printing — this is the first part I’ve ever shared, and I’m not experienced yet.
Second part: 44.85 mm
Printed on the K1C without supports, using a brim for better bed adhesion. I used a 5 mm screw (the original Atomstack P1 size), inserted into the hole of the part, then cut with a jeweler's saw to avoid damaging the threads, leaving a final length of 5 mm. Please double-check everything before printing — this is the first part I’ve ever shared, and I’m not experienced yet.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!