Thingiverse
Basic Adafruit PiTFT - 2.8" Resistive Touchscreen Display
by SPACETOOTH
18
Downloads
10
Likes
0
Makes
Model of the: Adafruit PiTFT - 2.8" Resistive Touchscreen Display
Made this as I needed to put the real thing inside a vacuum former, screens and vacuum formers don't usually mix well...
Would say this is pretty accurate, made using the resources on the adafruit site and measuring my own with callipers. Plan to update with a more detailed version in the future, i.e add an underside etc but for my plans this was unneeded as the plastic only impacts the top of the display.
Hopefully this could be useful for people planning builds or for similar uses to me, i've included the sketchup file for people if they want to adjust/check accuracy for their own projects.
Will upload an image of the print when I get it back from the workshop.
Resources:
Diagram - https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/downloads
Display - https://www.adafruit.com/products/2298
Made this as I needed to put the real thing inside a vacuum former, screens and vacuum formers don't usually mix well...
Would say this is pretty accurate, made using the resources on the adafruit site and measuring my own with callipers. Plan to update with a more detailed version in the future, i.e add an underside etc but for my plans this was unneeded as the plastic only impacts the top of the display.
Hopefully this could be useful for people planning builds or for similar uses to me, i've included the sketchup file for people if they want to adjust/check accuracy for their own projects.
Will upload an image of the print when I get it back from the workshop.
Resources:
Diagram - https://learn.adafruit.com/adafruit-pitft-28-inch-resistive-touchscreen-display-raspberry-pi/downloads
Display - https://www.adafruit.com/products/2298
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
