Thingiverse

Basic Phone Stand

by SGO_Nova

1 Downloads

2 Likes

0 Makes

A basic phone stand that can hold most phones in a landscape position. The model size needs to be upped from 100% to 1000%, or the width needs to be 80mm, which ever is easier for you to input. The gcode is setup perfectly fine, straight to running and only takes a little over 4 hours. This only uses 28g of filament and is a great design! THIS REQUIRES NO SUPPORTS!!!!

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

4 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Basic Phone Stand need supports when printing?

No supports needed for Basic Phone Stand — it's designed to print clean off the bed.

How long does it take to print Basic Phone Stand?

According to the design notes, Basic Phone Stand takes approximately 4 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Basic Phone Stand available in?

Basic Phone Stand is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Basic Phone Stand free to download?

Yes, Basic Phone Stand is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Basic Phone Stand

Similar Models

Add to Collection