Basic Storage Container

My Ender 3 S1 Pro did not require any supports to print however if you want to be safe you can print with supports. The print in the images is at 75% scale (via Cura Slicer) of the STL model I uploaded, since I didn't need anything too large for what I was storing. I may in the future upload an updated model to make slightly more printing friendly, let me know if there are any improvements you all would suggest.

Cura Slicer Settings:
Layer Height: .2mm
Extruder Temp: 200 C
Heat Bed: 60 C
Movement speed: 65mm/s
Supports: No
Infill: 10%
Build plate adhesion (optional): Skirt
Infill optimization: checked