Thingiverse
Basic vise w/ knurled knob
door Sigurour
97
Downloads
83
Likes
0
Makes
Basic vise used for clamping pcbs while soldering. Can be used for anything else too though.
threaded rod should be printed upright with the knob on the bottom.
sled should be printed with tapped hole upright on the shorter side.
frame should be printed as is with support structure. holes and clip slot have to be drilled out and sanded after print.
clip should be printed on its side.
These settings worked well when printed in pla on my Kossel delta:
0,2mm nozzle
0,1mm layer height
1mm shell thickness
35% infill
20mm/s speed
197°C
95% Flow
Threads should be retapped after printing if printed with lower settings.
threaded rod should be printed upright with the knob on the bottom.
sled should be printed with tapped hole upright on the shorter side.
frame should be printed as is with support structure. holes and clip slot have to be drilled out and sanded after print.
clip should be printed on its side.
These settings worked well when printed in pla on my Kossel delta:
0,2mm nozzle
0,1mm layer height
1mm shell thickness
35% infill
20mm/s speed
197°C
95% Flow
Threads should be retapped after printing if printed with lower settings.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!