Thingiverse

Bathing Mug

by anurajms

1 Downloads

1 Likes

1 Makes

This is the STL file for a bathing mug. It requires supports, but you can minimize support usage by flipping the mug so that the bottom is on the printer bed. Additionally, using tree support can further reduce printing time and material usage.
For an Ender 3 S1 Pro printer at 70mm/sec,0.28mm layer height, 0.4mm nozzle the total printing time was 10 hours and 30 minutes.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

0.28mm layers

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Layer height

0.28 mm

Est. print time

10 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Bathing Mug?

Any FDM printer should handle Bathing Mug just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

How long does it take to print Bathing Mug?

According to the design notes, Bathing Mug takes approximately 10 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Bathing Mug available in?

Bathing Mug is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Bathing Mug free to download?

Yes, Bathing Mug is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Bathing Mug

Add to Collection