Batman 4 HueForge with frame

I've included a mini frame for this. It prints in less than an hour and the print can be superglued to the frame or I have been using glue dots that are mostly used in scrapbooking. The frame prints great with the satndard .2 print profile. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm The Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.6mm Filaments Used: #0f1f0b PLA Bambu Labs Black Transmission Distance: 0.1 #7783ab PLA Bambu Labs Blue Grey Transmission Distance: 2.7 #eb5409 PLA Bambu Labs Orange Transmission Distance: 5.5 #ffffff PLA Bambu Labs Jade White Transmission Distance: 5.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #5 (0.56mm) swap to Blue Grey At layer #9 (0.88mm) swap to Orange At layer #13 (1.2mm) swap to Jade White for the rest.