MakerWorld
2D Art
Zum Modell
Batman clock
7
Downloads
15
Likes
3
Makes
Batman clock Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.72mm and the Actual Thickness is 2.08mm #000000 PLA Sunlu + 2.0 Black Transmission Distance: 0.1 #ffffff PLA Sunlu + 2.0 White Transmission Distance: 6.8 #c12e1f PLA BambuLab Basic Red Transmission Distance: 3.8 #f4ee2a PLA BambuLab Basic Yellow Transmission Distance: 5.8 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to White At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Yellow At layer #17 (1.44mm) swap to White for the rest. For clock hands you can use the MH011 kit or purchase from amazon for a set of parts https://amzn.to/41t5wa4
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
