MakerWorld
Hueforge & Lithophane
Zum Modell
Batman Hueforge - Explosion
31
Downloads
21
Likes
24
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmIf changing size . . . only change X and Y, not Z.The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Matte White Transmission Distance: 3.5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #10 (0.88mm) swap to Blue GrayAt layer #14 (1.2mm) swap to GrayAt layer #20 (1.68mm) swap to White for the rest.
DMurr5050 veröffentlicht auch auf
23 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!