Batman Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 200x125.08mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Silver/Gray Transmission Distance: 0.5 PLA Smart Recycled White Transmission Distance: 5.7 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Silver/Gray At layer #12 (1.04mm) swap to White for the rest.