Batman Hueforge

This is an image of Batman made with hueforge.Here are the instructions for printing: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x195.49mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Blue At layer #19 (1.52mm) swap to Grey At layer #20 (1.68mm) swap to Jade White for the rest. If you like this post, please consider boosting it, thank you:Boost Me