Batman - Hueforge

Remember if you sant to scale, do it only with x and y axis, z must be the same as original. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Tough Gray Transmission Distance: 1.8PLA BambuLab Matte Ash Gray Transmission Distance: 1.5PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to GrayAt layer #14 (1.2mm) swap to Ash GrayA