Batman - HueForge

ModelDo NOT adjust the size in your slicer!! The layers will not come out right.Do not change the size, this will cause errors in color change compromising the entire print.Use my print profile or you will not get the desired results.It can be printed safely without AMS and on any printer.I hope you like it, I hope you like it, if you want to support me leave a like and vote five stars thank you! Nozzle: 0.4Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Charcoal At layer #7 (0.64mm) swap to Silver At layer #10 (0.88mm) swap