Batman Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x125.08mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled Silver/Gray Transmission Distance: 0.5 PLA Smart Recycled White Transmission Distance: 5.7This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Silver/Gray At layer #12 (1.04mm) swap to White for the rest.