Batman in Red

Project: Batman Rojo.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 126.59x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #12 (1.04mm) swap to RedAt layer #17 (1.44mm) swap to White for the rest.