Batman

Project: Batman thicker.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 201.48x240mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3mm and the Actual Depth is 2.5mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Black Transmission Distance: 0.6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Jade White At layer #20 (1.68mm) swap to Yellow At layer #26 (2.16mm) swap to Black for the rest.