batman nightmare hueforge

Sell my prints commercially by joining my PatreonJoin my Patreon to gain access and commercial license to print and sell all my designs plus gain access to prints that will not be shared publiclyPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 114.37x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA PolyLite Grey Transmission Distance: 1PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to Blue GrayAt layer #13 (1.12mm) swap to GreyAt layer #20 (1.68mm) swap to White for the rest. the photo I used filaments, black, silver, grey and white, for best results use the above colors**Unlock Exclusive 3D Printing Benefits by Supporting My Work!**Are you passionate about 3D