Batman Slaps Robin - Wall Art

Project: Barman ostia Robin.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 150x149.67mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.9mm and the Actual Depth is 1.9mm Filaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Paramount 3D Terra Cotta Transmission Distance: 4 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 7 unique filaments Swap Instructions: Start with Black At layer #2 (0.24mm) swap to Red At layer #6 (0.56mm) swap to Black At layer #9 (0.8mm) swap to Blue At layer #11 (0.96mm) swap to Jade White At layer #15 (1.28mm) swap to Terra Cotta At layer #16 (1.36mm) swap to BambuLab Green At layer #18 (1.52mm) swap to Yellow for the rest.