Battery Welding Jig

SummaryI wanted an adjustable jig to hold my battery cells while i glue and/or weld them together. I found one on an unnamed online store for a little under $80. No Way!!!45 minutes on Tinkercad and a couple refinements and I have the same thing for about $5 worth of hardware and a few pennies of filament. I'm no cad expert, so I cut in the dovetail with Bambu Slicer. You can go directly to the Tinkercad file and cut the long piece yourself or use another slicer. Either way it's too big for most printers uncut. 2x short sides and 2x long sides,or 4x either side,Depends what size you need. Comments and remixes are welcomed.Print SettingsPrinter Brand: Bambulabs Printer: Bambu X1C Rafts: No Supports: Yes Resolution: draft is good enough Infill: 30% gyroid Filament: any pla, pla+, petg, asa, cf, anything stiffany Notes: I like tree supports, use whichever you like.Post-PrintingParts: 4x- 5/16 x 1.5" hex bolts4x 5/16 fender washers4x wing nuts or bolts. I recommend wing nuts fo