Thingiverse
Bavarian Chapel
por DsK_Printing
18
Descargas
6
Likes
0
Makes
Base part is printed with 0.16mm layer height.
I've printed it with tree support but i think standard support for touching baseplate only should be enough. Primarily for the entrance door.
LED-Holder included.
In case you want to illuminate the chapel from the inside, make sure all the inner walls are painted lightproof in the first place.
Roof parts are all printed with 0.1mm layer hight.
Printed with PLA 200°/60° (see slicer pictures for print orientation)
I will add a one-part file for the big roof retroactively. I've printed it in two parts.*
*UPDATE: I've just added a .stl for a complete version of the top roof. Please notice that i have not printed this and can therefor only give an example how i would give it a try printing (see slicerpicture)
I've printed it with tree support but i think standard support for touching baseplate only should be enough. Primarily for the entrance door.
LED-Holder included.
In case you want to illuminate the chapel from the inside, make sure all the inner walls are painted lightproof in the first place.
Roof parts are all printed with 0.1mm layer hight.
Printed with PLA 200°/60° (see slicer pictures for print orientation)
I will add a one-part file for the big roof retroactively. I've printed it in two parts.*
*UPDATE: I've just added a .stl for a complete version of the top roof. Please notice that i have not printed this and can therefor only give an example how i would give it a try printing (see slicerpicture)
DsK_Printing también publica en
63 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!