BAYONETTA

Project: Bayonetta.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 127.5x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Matte Dark Blue Transmission Distance: 0.3 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Matte Ice Blue Transmission Distance: 3.5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to Dark Blue At layer #13 (1.12mm) swap to Lilac Purple At layer #15 (1.28mm) swap to BambuLab Green At layer #20 (1.68mm) swap to Ice Blue At layer #22 (1.84mm) swap to Beig