BBP1S_LCD_Case

A case for the BBP1S LCD.
On the front, the push button hole may need moving a bit, or modifying to fit a button.
M3 x 15 countersunk screws are used to hold the front and back together, and M3 x 18 hex brass spacers are the nuts.The mount is screwed onto the hex spacers with M3 x 12 screws.
I couldn't find M3 x 15 countersunk screws in my stash so round heads were used.

The Mount_3 goes on the fan holes on the FastBot BBP1S case.
http://www.thingiverse.com/thing:946428

The back now has mounting holes in the center.
These designs are a bit rough but they do reflect my not so good skill set ;)

I've added some pictures of the "better" way to mount the LCD to the BBP box using "xxxMount1" version. It looks a lot cleaner.

Also, do have a look at http://www.thingiverse.com/thing:1520078 as I think Kolasinski's is a better design in a lot of ways.

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lXHvCFVx9Zc