Beach HueForge

HueForge of the Beach This is an AMS profile with the dimensions: 152.4 x 76.4 x 2.08 mm / 6 x 3 x .08 in A HueForge can take a bit to slice, but all the settings in the slicer are ready for a 0.4 nozzle. Below are the filament swap instructions. Keep in mind that if you use a different brand than I did, the color of the print might vary. No supports needed. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Gold Transmission Distance: 3.2PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to BlueAt layer #13 (1.12mm) swap to GoldAt layer #17 (1.44mm) swap to Jade White for the rest.