Beacon mount Qidi Plus4

This is the latest version of this.

Another beacon mount that keeps stock cooling fan ducting and only requires minimal cutting of the hotend cover. Offset approx 19,-1. Also requires some other changes to bed mesh settings in printer config.

Warning: It does hit the printers frame if you use automatic unload/filament cutting. So do not use this if you have a qidi box or use the auto unload. I believe this can be fixed somewhat easily but have not looked at it yet.

This is printed in pa12-cf, 3 walls, 15% crosshatch, support enabled. Flipped 180 in slicer. PETG-cf/gf is probably the minimum temp filament needed.

Offset is approx 19,-1. You can measure it yourself too.

Edit: Nylon in any form seems less than ideal for this (the PA12-cf one eventually warped slightly). I printed it in PET-cf and it seems better. I also think PETG-cf/gf would be fine since the beacon coil temperature doesn't exceed 80c. Assuming you are not printing more exotic filaments/using higher bed