Thingiverse
Beagleboard XM Case
par alangarf
13
Téléchargements
2
Likes
0
Makes
This is a Beagleboard Box I created in Fusion 360 for a Rev C board.
I'm using 3mm standoffs to screw the board down and then 3mm screws through the lid to hold the top on. 3mm metal thread screw can screw into the mounts without issue if the infill percentage is high (> 20%) otherwise too much torque may delaminate the mounts.
I'm using 3mm standoffs to screw the board down and then 3mm screws through the lid to hold the top on. 3mm metal thread screw can screw into the mounts without issue if the infill percentage is high (> 20%) otherwise too much torque may delaminate the mounts.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !