Thingiverse
BED_LEVEL_CHEKER for PRN3D
von gingersoft
1
Downloads
2
Likes
0
Makes
Caution!!! use this parts with your own risk!!!
Caution!!! use this parts with your own risk!!!
Caution!!! use this parts with your own risk!!!
Misappropriate X limit switch.
Please attach X limit switch to the position of the sample photo after movement to XYZ home position.
Raise the Z-axis to the position that LED turns ON/OFF
Close the knurl nut until to turn off the LED light.
(Repeat this operation same at the four corners of the heated bed.)
Never push the X / Y / Z home button during adjustment.
Caution!!! use this parts with your own risk!!!
Caution!!! use this parts with your own risk!!!
Misappropriate X limit switch.
Please attach X limit switch to the position of the sample photo after movement to XYZ home position.
Raise the Z-axis to the position that LED turns ON/OFF
Close the knurl nut until to turn off the LED light.
(Repeat this operation same at the four corners of the heated bed.)
Never push the X / Y / Z home button during adjustment.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!