Thingiverse
Bed level test
by DuckTheSam
1
Downloads
1
Likes
0
Makes
Info:
1) Be at the printer and watch it print.
2) You want the filament to just glide out and not drop down
3) If it drops, you want to higher the build area.
Print time: 6 minutes (MAX)
Tips:
If your print keeps falling off, try to lower the bed heat. I had the problem and then i made this file and lowered the bed heat, now it runs smoothly with no problems.
Check the Build Plate adhesion image and try to print with that.
1) Be at the printer and watch it print.
2) You want the filament to just glide out and not drop down
3) If it drops, you want to higher the build area.
Print time: 6 minutes (MAX)
Tips:
If your print keeps falling off, try to lower the bed heat. I had the problem and then i made this file and lowered the bed heat, now it runs smoothly with no problems.
Check the Build Plate adhesion image and try to print with that.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
