Bed Leveling Assistant for Anycubic 4Max

To make bed leveling easy I found a gcode and modified it for 4Max, the original code is from Omar McAdam and it was made for a CR10

Here a sloppy video I made, don’t mind me trying to show how I put the paper under the nozzle it was just to show: https://www.youtube.com/watch?v=kwHit0_RotU

Here explanation from Omar McAdam on his CR10: https://www.youtube.com/watch?v=K80j13I1RxI&t

Download and use the gcode file,
Don't use the Dummy.stl it is just there because Thingiverse doesn't accept gcode files alone.

Basically what it does is, you load the gcode file in the printer like you are printing and the gcode will heat up the bed to 50C and nozzle to 180C, when it is finishes heating, the display will show “Ready to Level” with a beep, after this you can push the navigation button and it will go to first corner ready to level, after you level this corner you can push the navigation button again and it will go to next corner, it does this to all corners 3 times, and after al