Bed slat spacer

This is made to separate my bed slats that tend to bunch together leaving a large hole in the middle.

Those were made with measurements from my own bed, meaning the separator is 56.93mm wide, and the external separator (between the outermost slat and the bed frame) rise up by 16 mm. Start from these values if you want to adjust for your own bed.

Those were made for ease of applying, so they are not locked on both sides. After testing, they don't tend to fall or move around, but if they do I might add a double-sided version.

EDIT: now with the double sided. Max slat thickness here is 11mm, adjust if yours are thicker.