Thingiverse
BedLevel_test_235x235
von AlphaUno
40
Downloads
20
Likes
0
Makes
Form to test and calibrate the bed (235x235).
The squares are 1x20x20 mm, and after printing and cooling, they must be measured using a caliper. The surface also tests the finish of the top bed. The shape is intended to test the X, Y and Z axes, print nozzle height, bed adhesion and topcoat finish.
On request, another 20mm high shape was optionally created.
The squares are 1x20x20 mm, and after printing and cooling, they must be measured using a caliper. The surface also tests the finish of the top bed. The shape is intended to test the X, Y and Z axes, print nozzle height, bed adhesion and topcoat finish.
On request, another 20mm high shape was optionally created.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!