Bedside Raspberry Pi Console Case for 3.5" PiTFT

This was created to provide a case/stand for a bedside console that controls home automation using Universal Devices ISY-994 (as of May 2018 this software also supports controlling a Home Assistant hub) via a Raspberry Pi with an Adafruit 3.5" PiTFT. The related software is at https://github.com/kevinkahn/softconsole but of course the case could be used for any RPi+PiTFT application. Printed successfully in ABS. All screws are metric M2.5. The short screws that hold the Pi to the case are 12 mm. The long screws that hold the display are 28mm. The screws that are used in the stand are also 12mm. The screws that secure the lid are 10mm but 12s or 8s would probably also work fine.

V2a has 2 minor changes - it adds a thin feedslot for a Pi camera cable and it added some countersink to the lid screwholes to allow a shorter screw to be used with a nut.

V4 is a latest clean up of the design and includes a locknut for securing the case to the stand. If you print the locknut do it in a