Thingiverse
Bee Wind Chime
par TL_all_easy
2
Téléchargements
1
Likes
0
Makes
The 3MF files are optimized for Orcaslicer (PLA generic) (individual STL parts). I printed it on the Elegoo CC2.
I assembled the individual parts with glue. For the axles, you can use 4mm carbon fiber tubing, threaded rods, or something similar; you may need to re-drill the holes beforehand with a 4.2mm drill bit. I installed ball bearings (8x4x3mm) in the axles.
die 3mf Datein sind für Orcaslicer (PLA generic) optimiert (STL einzelne Teile). Ich habs auf dem Elegoo CC2 gedruckt.
Die einzelnen Teile hab ich mit Klebstoff zusammengebaut, für die Achsen könnt ihr 4mm Kohlefasrerohr, Gewindestangen od. ähnliches verwenden, ev. die Löcher vorher mit einem 4,2 mm Bohrer nachbohren. In der Achse habe ich Kugellager (8x4x3mm) verbaut.
I assembled the individual parts with glue. For the axles, you can use 4mm carbon fiber tubing, threaded rods, or something similar; you may need to re-drill the holes beforehand with a 4.2mm drill bit. I installed ball bearings (8x4x3mm) in the axles.
die 3mf Datein sind für Orcaslicer (PLA generic) optimiert (STL einzelne Teile). Ich habs auf dem Elegoo CC2 gedruckt.
Die einzelnen Teile hab ich mit Klebstoff zusammengebaut, für die Achsen könnt ihr 4mm Kohlefasrerohr, Gewindestangen od. ähnliches verwenden, ev. die Löcher vorher mit einem 4,2 mm Bohrer nachbohren. In der Achse habe ich Kugellager (8x4x3mm) verbaut.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !