Thingiverse
Begode Mten4 handle mount
di kowloonfpv
6
Download
8
Likes
0
Makes
Why Begode didn't put handle in mten4?
There are 2 files here, one to hold the upper part of the handle and other one to hold the lower.
The upper part I print it with PLA and lower with TPU it work like a tail stand.
You have to remove two interconnect supports to fit the design , and at last drill a 3mm holes from the bottoms to hold the handle in place.
This is what I use(28cm) for this design
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.2e8b2e8d5mvTRO&id=521254825644&_u=6231hdg14460
There are 2 files here, one to hold the upper part of the handle and other one to hold the lower.
The upper part I print it with PLA and lower with TPU it work like a tail stand.
You have to remove two interconnect supports to fit the design , and at last drill a 3mm holes from the bottoms to hold the handle in place.
This is what I use(28cm) for this design
https://item.taobao.com/item.htm?spm=a1z09.2.0.0.2e8b2e8d5mvTRO&id=521254825644&_u=6231hdg14460
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
