Belle Hueforge

Next up on the disney princess series, Belle! Project: belle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Paramount 3D British Racing Green Transmission Distance: 3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA Overture Matte White Transmission Distance: 3.7This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to British Racing Green At layer #12 (1.04mm) swap to Lava Red At layer #14 (1.2mm) swap to Savannah Yellow At layer #18 (1.52mm) swap to White for the rest.