Ben Harper Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 162.88x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA BambulabBasic Black Transmission Distance: 0.3 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Indigo Purple At layer #12 (1.04mm) swap to Red At layer #18 (1.52mm) swap to Sunflower Yellow At layer #21 (1.76mm) swap to Jade White for the rest.