Thingiverse
Bench Dog 20mm
par maot1985
141
Téléchargements
71
Likes
0
Makes
I needed some bench dogs for my little workbench. The original bench dogs are to expensive.
I inserted a M6 nut in the base and glued and screwed the top to the base (I used 3mm x 15mm wood screws).
On the top and the bottom I attached some 2mm self-adhesive EPDM-foam.
For the pin I used a M6 nut and a M6 countersunk bolt, so that the pin can manually be attached to the bench dog.
I inserted a M6 nut in the base and glued and screwed the top to the base (I used 3mm x 15mm wood screws).
On the top and the bottom I attached some 2mm self-adhesive EPDM-foam.
For the pin I used a M6 nut and a M6 countersunk bolt, so that the pin can manually be attached to the bench dog.
maot1985 publie également sur
86 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
