Thingiverse
Bench rest front support with joystick
by Zeubest
6
Downloads
9
Likes
0
Makes
Benchrest front support, made of Chinese economy parts and 3d prints.
The main base can be either 3d printed (file supplied) but it's slightly "soft", or metal. I started with the printed version, then made a 10mm-thick metal version. A DXF file of the cut-out and a surround are included if you choose the metal option.
It's assembled with M4 and M5 screws: I tapped the plastic (the holes are adapted).
The two large braking screws are tapped M12.
The feet have M8 threads.
The weight compensation springs were found on Amazon.
----------------------------------------------------------------------
Support avant de benchrest, composé de pièces économiques chinoises et d'impressions 3d.
La base peur être soit en imprimée 3d ( fichier fourni) mais c'est légèrement “souple”, soit en métal . J'ai commencé avec la version imprimée, puis ai fait une version en métal de 10mm d'épaisseur. Un fichier DXF de découpe et un entourage sont dans les fichiers si vous choisissez l
The main base can be either 3d printed (file supplied) but it's slightly "soft", or metal. I started with the printed version, then made a 10mm-thick metal version. A DXF file of the cut-out and a surround are included if you choose the metal option.
It's assembled with M4 and M5 screws: I tapped the plastic (the holes are adapted).
The two large braking screws are tapped M12.
The feet have M8 threads.
The weight compensation springs were found on Amazon.
----------------------------------------------------------------------
Support avant de benchrest, composé de pièces économiques chinoises et d'impressions 3d.
La base peur être soit en imprimée 3d ( fichier fourni) mais c'est légèrement “souple”, soit en métal . J'ai commencé avec la version imprimée, puis ai fait une version en métal de 10mm d'épaisseur. Un fichier DXF de découpe et un entourage sont dans les fichiers si vous choisissez l
Zeubest also publishes on
12 additional models across 1 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!