Benchy Wave Jumping HueForge

The 3D Benchy Wave Jumping Hybrid HueForge. Can be printed with and without an AMS unit. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 45.5mm and the Actual Depth is 45.12mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Chrominal Shadow Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Polysonic White Transmission Distance: 7 PLA PolyLite Wine Red Transmission Distance: 1This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.72mm) swap to Shadow Gray At layer #13 (1.2mm) swap to Grey At layer #18 (1.6mm) swap to Polysonic White At layer #27 (2.32mm) swap to Wine Red for the rest. Boost MeThanks for the Boost!