MakerWorld
3D Printer Accessories
Zum Modell
Bentobox 12V Cable Routing
66
Downloads
25
Likes
14
Makes
Finally printed the BentoBox recirculating airfilter and made some changes to it and some nice cable management inside the P1S for 12V. I use the filter mainly when printing ABS/ASA to avoid VOCs and that nasty white deposit that accumulates over time on the interior. Another benefit is that I’ve found out from others - the temperature is more homogeneous and this avoids warping with ABS/ASA. I didn't like the way the cables hung under the fans. That's why I made a remix and integrated a cable duct into the fancase. The cable goes through one of the free fan holes into the cable routing connecting both fans together. The fanduct I also made compatible with the more available M3 inserts from ruthex M3 x 5.7mm. I drilled a hole in the interior of the P1S and inserted a rubber grommet for a nice looking cable management. On the backplate I used a DC socket for 12V and soldered a cable with a JST connector to it. The 2x server fans from Arctic S4028-15K have each 15K RPM/20cfm and
TechNerd veröffentlicht auch auf
42 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!