Berserk Bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50.08x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.7mm and the Actual Depth is 1.8mm Filaments Used: PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 This print uses 3 unique filaments Swap Instructions: Start with Jade White At layer #5 (0.48mm) swap to Black At layer #9 (0.8mm) swap to Jade White At layer #16 (1.36mm) swap to Red for the rest.