Beru Solo Leveling Hueforge

Project: Beru.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 139.26x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.6mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Sunlu Purple Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #8 (0.8mm) swap to Purple At layer #14 (1.28mm) swap to Jade White for the rest. ***I used Bambu Purple and it came out the way in my picture. I haven't calculated the TD value for this color yet, but most purple filaments should give the same effect***