Better Replacement Bucket Handle

Improved replacement handle for 5-gallon and smaller buckets. No glue or fasteners required.

The tapered dovetail should be a tight friction fit. Depending on how your printer is tweaked it will probably stick about 1/4-1/2" short of being fully together and considerable force is needed to assemble it the remaining bit around the wire. (I use my 18" adjustable pliers, but a vise or careful taps with a hammer will work as well). Once assembled on the bucket wire it won't come apart unless you want it to.

The small flats allow it to be printed without support.

I've used both PLA and PETG for this one, recommend PETG for outdoor use.