Thingiverse
Beyblade Arena
von Legufix
226
Downloads
219
Likes
2
Makes
My biggest self-designed 3D printing project so far (overall size 536 x 371 x120mm). I designed and built a beyblade arena for my kids.
The arena is made of several parts because I wanted to minimize the amount of material. Nevertheless this is a quite filament consuming project but I really like the result and my children are happy.
After printing and clueing the floor with 2 component adhesive I used filler material and grinding to get a smooth surface (especially in the middle of the arena). I also painted (with aerosol lacquer) the floor.
To build the arena you will need 2 pieces of all the parts, a couple of screws and nuts (M3, 3x20,...) and e.g. epoxy resin to clue the parts together.
UPDATE: a detailled instruction for assembly etc. can be found at: https://www.instructables.com/member/Legufix/instructables/
The arena is made of several parts because I wanted to minimize the amount of material. Nevertheless this is a quite filament consuming project but I really like the result and my children are happy.
After printing and clueing the floor with 2 component adhesive I used filler material and grinding to get a smooth surface (especially in the middle of the arena). I also painted (with aerosol lacquer) the floor.
To build the arena you will need 2 pieces of all the parts, a couple of screws and nuts (M3, 3x20,...) and e.g. epoxy resin to clue the parts together.
UPDATE: a detailled instruction for assembly etc. can be found at: https://www.instructables.com/member/Legufix/instructables/
Legufix veröffentlicht auch auf
112 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
