BIBO Touch Pi Camera 2.1 Mount

I wanted an awesome way to mount my Pi camera on the z-axis without having to modify the BIBO in any way. There are 4 rectangle holes in the back of the support plate. I popped on Tinkercad and plugged in the measurements which all happened to be to the whole mm. I balanced it a little bit and measured the opening for the Pi camera. It puts the lens at the perfect height to see the extruders and the object. I had to adjust focus on the camera lens almost all the way forward. Feel free to modify and reshare! It's a pretty simple mount!

I basically use OctoPrint on OctoPi on a Pi attached to the BIBO. With this mount, I have the perfect setup!!!