Thingiverse
BiCopter
by algerbens
85
Downloads
83
Likes
3
Makes
Build a BiCopter using two 1804 2400kv brushless motors with a 12mmx12mm mounting pattern.
Second motor option is 1806 2300kv motor with a 16mmx12mm mounting pattern.
Motor to Servo mount STL files are included for both patterns.
Legs are 2mm carbon fiber rod.
Servos are HS85 Metal Gear.
Based on a piece of 10mm square tubing.
The flight controller shown is a FLIP 32+.
The following link is a test flight, later a camera and 5.8ghz transmitter were added and the BiCopter was flown FPV.
https://www.youtube.com/watch?v=a6w27pSw3t0
Second motor option is 1806 2300kv motor with a 16mmx12mm mounting pattern.
Motor to Servo mount STL files are included for both patterns.
Legs are 2mm carbon fiber rod.
Servos are HS85 Metal Gear.
Based on a piece of 10mm square tubing.
The flight controller shown is a FLIP 32+.
The following link is a test flight, later a camera and 5.8ghz transmitter were added and the BiCopter was flown FPV.
https://www.youtube.com/watch?v=a6w27pSw3t0
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!